Home | FAQs | Contact | Our Mission
Cedar River WSD

Cross Connections

Return to the resources page
 
Backflow Assemblies
Approved Testers

 
 
FAQ
WACs & RCWs

CERTIFIED BACKFLOW TESTERS AVAILABLE FOR TESTING ON COMMERCIAL BASIS

Notice of Disclaimer

This list is provided merely for the convenience of the water service customers. Cedar River Water & Sewer District makes no representation regarding the skill or quality of service of the testers listed below. Furthermore, Cedar River Water & Sewer District does not assume or accept any liabilities for the actions or performance of such testers. Customers are required to use their own judgement with respect to contracting with these or any other testers. The District, however, recommends that you ask the following questions:

  1. Does the person testing have a current certification?
  2. Can they repair the device if it fails the test?
  3. Do they have a business license and insurance?

The state requires the test results to be on file at the District office. Please fax or mail a copy of the completed test results to Cedar River Water & Sewer District, as soon as possible, after the testing of the Backflow Assembly Device.

Our mailing address:

Cedar River Water & Sewer District
PO Box 1040
Maple Valley, WA 98038

Approved Testers List

Before you contact someone to have your Backflow Assembly tested, be sure to have the following information readily available:

Information Example
Manufacture’s Brand name of each assembly unit i.e.(These are just a few brand names, there may be others) Conbraco
Febco
Watts
Wilkens
Model Number 805Y
950XL
007M2PCQt
40-108-A2T
Type of Backflow Device (RPBA) Reduced Pressure Backflow Assembly
(DCVA) Double Checkvalve Assembly
(PVBA) Pressure Vacuum Breaker Assembly
NOTE: The above list is an example only and may not list your model. All of the neceessary model information for your assembly can be found somewhere on the assembly itself.